asked
Hello, I have a Kenmore Elite Model 795.72372.310. Both the freezer and refrigerator only cool to 64F, despite the thermostat settings being 0F and 35F, respectively. The condenser coils were dirty, so I cleaned them. The condenser fan is running, and I can feel the compressor vibrating slightly. There is no ice buildup in the evaporator coils in the freezer, and only a little ice on the freezer sensor. I can hear the evaporator fans going but they stop when I open the freezer. There are no error codes on the display panel, and I don't know how to enter test mode. How can I confirm if the compressor and evaporator fans are functioning?
August 21st, 2024
I have a front load Whirlpool washer, model WFW92HEFW0, and the door lock light is flashing. The door is locked. What could be the issue and what steps should I take to resolve it?
November 26th, 2023
My Kenmore Elite dishwasher 665 12789k311 suddenly stopped running during the wash cycle, and no lights are on. I suspect the control panel might be faulty, but I'm not sure if there are other possibilities before replacing it. What could be the issue and are there any steps I can take to diagnose or fix it?
November 14th, 2024
We have a Whirlpool model ED22TQXGW00 refrigerator, 18 years old. The freezer and refrigerator sections have stopped cooling again after the cold control was replaced two weeks ago. The condenser coils are clean, but there is no air circulation. What should be the next part to replace, and is it worth repairing or should we consider buying a new refrigerator?
April 11th, 2024
Can a person disable the drink dispenser or ice maker in a bottom freezer refrigerator completely if there is no water line in the house for that, and they break so often that I don't want one? Will this somehow compromise the refrigerator or freezer?
March 25th, 2023
Replaced Heating Element, Thermistor, Thermostat, Fuse, everything, still getting HE error code on Samsung Dryer. Dryer is heating, just getting HE error code, one wire to the heating element did show signs of melting, replaced it, wonder if it messed up the element again. Any thoughts?
July 19th, 2023