asked
I have a 1974 Maytag top loader A207. When transitioning from rinse to spin, the agitator moves slightly but there is a rapid 2/s second 'witching sound' from the lower left, like a relay. The machine shuts down about 30 seconds after the noise starts and requires a 3-5 minute reset. What could be causing this issue and what can I do to fix it?
August 10th, 2023
I have a Maytag MDG6700AWW gas dryer that is not heating well and has given me a TS fault code. Is it the thermistor or the gas solenoid that is causing the issue, and what is the part number for the problem?
July 20th, 2024
My Whirlpool Cabrio washer is showing an error code of F72. Initially, it was reading SD when running a cycle, and after running the diagnostic, it went to C8, then F72 came up. The washer is approximately 6 years old, model WTW7300XW00. What does the F72 error code mean, and what steps can I take to resolve it?
January 31st, 2024
My built-in ice maker has stopped making ice. I have cleared the ice around the screw-coil, changed the water filter, and ensured the water outlet works. When I press the ice outlet switch, it makes noises as if it's going to produce ice, but there is no ice in the bin. What could be the issue, and where is the water inlet valve located?
February 18th, 2024
My 2011 Kenmore bottom freezer refrigerator suddenly went completely dead. I checked the power source and confirmed it's fine, but there are no lights and the control panel is blank. What could be the issue?
April 7th, 2023
My GE front load washer (model GFWR4805FOMC) is not unlocking or responding to commands. The start/pause button flashes, 'off' scrolls across the screen, and no other buttons work. The pump motor is running, but the front panel commands are unresponsive. What could be the issue, and how can I fix it?
August 22nd, 2023