I have a Dacor oven, ERD36SCH, from 2001. The oven has a regular electric element, a convection element, and a gas preheat on the roof of the oven compartment. The hot surface ignitor comes on but does not light the gas, although I do smell some gas. If I use a barbecue lighter, it will light the gas at the top of the oven but does not stay lit. It seems the gas valve is not opening enough. Could it be that the hot surface ignitor is weak or would it be something else?

January 20th, 2024

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

Our Bosch dishwasher does not shut the water off when the cycle is done. After about 15 minutes, the bottom tray is full and runs water on the floor. We are having to shut the water off to the unit to prevent this. What is causing this?

September 14th, 2023

Is it normal for the water level in an LG front-load washer model WM3250HVA to rise slightly above the inner spin basket during the water fill process, especially when done in diagnostic mode?

December 18th, 2024

I have a Bosch washing machine model # WFL2060UC/22. It won't drain even after replacing the drain pump, which sounds like it's trying to work. There's no blockage in the coin trap, debris catch, or small black hose, and the drain hose seems fine. No water comes out at the end of the drain hose. Does the machine need both cold and hot fill lines made by Bosch, or can I use a set from Home Depot? Also, could a malfunctioning door lock prevent the machine from draining, even if it seems to be working fine?

November 21st, 2024

Our double oven (model SCD302ZP, serial # 82040272) has been experiencing issues with the self-cleaning cycle, displaying error code F halfway through the cycle. We've spent nearly $3,000 on repairs, including replacing the control board, but the problem persists even after the warranty expired. What could be causing this issue, and what steps can we take to fix it?

May 29th, 2024

I have a Whirlpool Duet front load washer, model GHW9300PW4, which is 10 years old. The control panel only shows the control lock light, and I can only lock and unlock the washer. I plan to do the repair myself. What could be the issue, and how can I fix it?

August 12th, 2024