I have a Frigidaire combination washer and dryer model FEX831CS0. The problem is with the dryer; it runs for a few minutes and then shuts off. It heats up okay, but even in cool-down mode (no heat), it does the same thing. I removed the tension from the motor and the belt, but it still runs for a few minutes and shuts off. What do you think?

August 1st, 2024

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

We have a Kenmore Coldspot model # XXXXX manufactured 10-01. The ice maker is working, but in addition to ice, there are two leaks or slow drips. One is in the middle and causes a mound of ice to form in the middle of the bin. The second is in the back and causes the bin to freeze to the back of the refrigerator and creates a mound in the back. These mounds usually develop within 24 hours. Do I need to replace the entire ice maker?

January 29th, 2023

I have just bought a Kenmore Elite C790-600431 double convection oven and cannot get the top burners to work except for the warming burner. All the oven features and the clock are working. The lockout feature is not on and the burners still do not work. I have also tried putting a pot on the burner first and then tried turning the burner on and they still do not come on. Our stove is not equipped with the Sabbath feature. What could be the issue and what should I do?

June 18th, 2024

My dryer runs briefly then stops, with panel lights flashing. The lint pipe is clean, the basket is free of lint, and the drum turns when started. What could be the issue?

February 27th, 2023

I have a double drawer Fisher Paykel dishwasher with a 'flood switch has been activated' fault. I have cleaned the drain hoses and filters, but the fault won't reset. How can I reset the fault, and what triggers the flood switch?

December 13th, 2023

I have a Frigidaire LEQ2152HS0 dryer. When we press the start button, it only beeps three times and won't start. The only cycle it will run is delicate. There is no datasheet inside the door on how to put it into diagnostic mode. We pressed and held the option select to see if it was locked. It worked the first time, but now it's doing it again and we can't figure it out. How can I diagnose and fix this issue?

December 24th, 2023