asked

I have a Jenn Air S176B range from about 1992. Neither the oven nor broiler heat, but the clock and touch pad respond normally. I can hear clicks (relays?) when I turn the oven or broiler on. A professional repairman checked the continuity on both elements and they both beeped (good). He suspected the relay block, which I replaced, but it still doesn't work. Could it be the temp sensor (thermostat)?

September 23rd, 2023

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

I have a Gas Dryer Model ADG7005 AW. The burner lights from a cold start but goes out after a period of time and won't relight unless it's a cold start again. I've replaced the limit switches, cyclic thermostat, igniter, flame detector, and the timer advances in timed mode. What else could be the issue?

December 10th, 2024

I have a Maytag refrigerator and freezer that are not freezing or cooling, and the motor is not coming on. The only things working are the lights and fan. What could be the problem?

November 25th, 2023

Our new microwave continues to run with the light out after shutting the door, and it hums without turning the turntable or producing heat. What could be the issue, and is it safe to leave unplugged while we're out of town?

April 7th, 2024

I have a 5-year-old Maytag Performa "Side by Side" refrigerator/freezer with model # XXXXX. There is a foul odor, similar to stinky cheese or very smelly feet, that emanates from the fan on the back bottom of the unit when it turns on. No smell is present in the refrigerator or freezer. I believe the problem stems from the drain pan or drip pan in the assembly. However, this model does not have an easily accessible drain/drip pan. How can I clean the pan, either by removing it or cleaning it in place?

July 29th, 2023

I have a Kenmore front load model c45092. I accidentally disassembled the soap dispenser handle into three sections and lost the magnet, which is necessary for the washer to operate. How can I bypass the reed switch or properly reattach the magnet to restore functionality?

January 28th, 2024