asked

I have a Kenmore 90 series electric dryer, about 10 years old, model #110-69902890. It stopped mid-cycle last night, even after cooling and restarting. It works on air dry only. Could this be due to the thermostat stopping the dryer when it overheated?

May 17th, 2023

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

How do you remove the control panel on the left door of a Samsung refrigerator RFG297HDRS? The cover plate is already off, and I suspect the relay in the panel is not operating as there's no sound when I try to dispense ice or water. I removed the screw under the panel, but can't seem to budge the board.

May 15th, 2023

I am having a problem with my Viking VIPR161 Versavent Intake unit. The issue was due to vermin chewing through wiring in the remote blower, which has been repaired. However, the controller does not work even though the fan operates when wired separately. The control panel lights and switches appear to be working, and the cable connecting the control panel to the main PCB is intact. What could be the issue, and how can I fix it?

July 19th, 2023

I am working on a KitchenAid dishwasher model KUDS30IVBS3 with symptoms of multiple flashing lights on the control panel and standing water in the bottom. I have already disconnected and cleaned the ribbon cable on the control panel, cycled power, reset the keypad, checked the drain pump and heating element for continuity, and attempted to restore operation by heating the control panel with a hair dryer. The flashing lights are cycling in a pattern, and I have recorded the sequence. What further steps should I take to diagnose and resolve this issue?

January 18th, 2023

I have a Maytag glass top stove that takes a very long time to preheat and cook food. It is wired with a #6 gauge wire to a 60 amp breaker, which is higher than the recommended 40 to 50 amp breaker. Is the over amperage a problem, and what could be causing the slow preheating and cooking?

July 19th, 2023

I have a 3-year-old GE stackable washer-dryer combo. The washer is not working, and the only indication is that the lights blink except for the lid lock and rinse lights. I replaced the lock switch, but the issue persists. What could be the problem, and how can I troubleshoot it further?

August 17th, 2024