asked
I have a Kenmore Elite 795.74023.411 refrigerator that is not cooling properly. The coils in the refrigerator section have iced up twice before, but this time they are clean. The compressor and compressor fan are running, and the cooling fans inside the fridge are not iced over. The refrigerator has cooled to 60 degrees, then down to 40, and now maintains around 52 degrees, while the freezer section is at 30 degrees instead of the set 0 degrees. The freezer fan and compressor are running, but the freezer is not reaching the desired temperature. What could be the issue, and what steps should I take to diagnose and potentially fix it?
July 15th, 2024
My microwave works fine, but the paint is coming off the inside and looks like rust. Additionally, my 10-year-old Kenmore HE front-load washer will not start at the wash cycle, but I can run the rinse cycle twice to wash. What could be the issues with these appliances, and are they fixable?
August 5th, 2023
My Whirlpool dishwasher overflows when filling, leaking water at the fill fitting/port mounted on the side of the dishwasher body. This issue started after I rehabbed my kitchen and reconnected the dishwasher. The water pressure seems too high, causing water to gurgle out of the vent hole next to where the filler hose connects to the fitting. What could be causing this and how can I fix it?
February 26th, 2024
My GE microwave (model JVM3160DF2WW, purchased in September 2015) won't heat. Does the microwave still look and sound like it's running? What could be the issue, and should I repair or replace it?
May 5th, 2023
I have a Kenmore refrigerator Model # 253.63712300. The freezer is working but the refrigerator is not. What could be the issue and how can I fix it?
March 3rd, 2024
My Amana side-by-side refrigerator/freezer Model SCD23VBW has stopped making ice. The freezer, water dispenser, ice auger, and other functions seem fine, but the ice maker is not receiving enough water. If I manually add water, the ice maker works correctly, but it doesn't refill automatically. I suspect a faulty inlet valve. What is the best way to test the inlet valve, and could it be a sensor or controller issue instead?
January 15th, 2024