Lori L. asked
I have a Kenmore Microwave Hood Combination model # 85470 that suddenly shut down with no power, no lights, and no clock display. I checked the breaker and the outlet, both are fine. I opened the microwave and found the fuse, which looks brand new and reads zero on an Ohm meter. I also checked the control board behind the display panel, and it looks fine. What could be the problem?
February 16th, 2024
Mary H. answered
The issue could be related to an open cavity fuse or a thermal fuse. Here are some steps to diagnose...
February 16th, 2024
Create an account to view answers and interact with the community!
I just bought a house with a Wolf range and wanted to change from propane to natural gas. The Sub-Zero/Wolf tech said this is a different model. My range shows a red big wolf with 'gourmet' on it. Who should I contact for this conversion? Additionally, when I turn on the oven, I hear the igniter but don't hear the flame turning on both sides of the oven. Is there something I'm doing wrong, or does it need repair?
September 9th, 2024
Hello. I have an LG washer (model WM2455HG) that is completely dead. I have checked the voltage to the unit and it seems to be getting power. I have voltage at most power loads, including the valve motor area. Is there a common issue with LG washers in this instance?
March 25th, 2023
My microwave starts up when you close the door, but there is no fan and it gets hot inside. What could be the issue and how can I troubleshoot it?
November 15th, 2023
My microwave appears to be working as it accepts input and goes through the motions, but it does not heat food or defrost as intended. What could be the issue and what can I do to troubleshoot it?
April 19th, 2023
I have a GE XL44 gas oven. After running the self-cleaning mode, I am unable to start the oven. When I try to put it in bake or broil mode, the display simply says 'Door' and won't start the oven. I checked the door and reattached a disengaged hinge spring, but I still get the 'Door' warning. I also unplugged the oven for several minutes to reset it, but the warning persists. What could be the issue and how can I fix it?
April 3rd, 2024