asked

I have a Kenmore washer where the cold water comes out very slowly, while the hot or warm water comes out normally. The cold water flows normally when checked at the source, and the hose is clear of debris or kinks. What could be causing this issue?

December 18th, 2023

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

I have a Kenmore refrigerator model 71294100. The ice maker is no longer producing ice and no water is getting into the freezing area. There is plenty of water pressure to the circulation pump, and the ice maker itself seems to be working. The rotating elements continue to go around. When the signal is sent to the pump, it only lasts for a couple of seconds, and water just dribbles out of the line going into the back of the refrigerator. Is the pump broken, or could there be other issues like a clogged intake screen, clogged drain line, or a bad sensor in the ice maker itself?

September 21st, 2023

I just installed a used Quiet Series 300 dishwasher with a new cord, but it doesn't work. The control panel lights come on, but not all buttons work, and hitting start does nothing. Did I reverse the hot and neutral wires? The water is turned on, and the door fully closes with a click.

December 18th, 2023

My KitchenAid side-by-side refrigerator has water frozen all over the interior of the freezer, but no ice cubes. How do I fix this problem?

September 2nd, 2024

I have an Estate Whirlpool top-loading washer. After a wash cycle, I discovered a large amount of water on the floor, but nothing was wet except the floor. No water was seen on the washer surfaces or down the wall from the drain. I unhooked the drain hose, which was dry, and water poured out of the washer opening. The interior of the washer is dry. What could be causing the leak and what steps should I take to diagnose and fix it?

November 1st, 2024

Why is there no power at the plug on the water valve, and what should I do if the new ice maker fills the ice tray immediately after installation?

December 26th, 2023