Matthew P. asked
I have a Maytag Bravos 400 quiet series top loading washing machine. I am getting the LD message for long drain. I have cleaned the drain and water pump, checked all hoses, and ensured the drain pipe is within the correct height. The tub drains only when I turn off the power, but during wash cycles, it always shows the LD code. What am I missing?
June 25th, 2023
Andrea P. answered
The issue seems to be with the control board, which is not sending power to the drain pump during wa...
June 25th, 2023
Create an account to view answers and interact with the community!
I have a Marvel 3SWCE under counter wine cooler that stopped cooling. When plugged in, no fan, no compressor starts, and the control panel shows 74°F. The onboard diagnostics indicated that the mullion heater might be on or shorted, but I can't find it. Is there a mullion heater, and what could be the issue? Any help is appreciated.
September 14th, 2023
I have a Bosch refrigerator model # b20cs80sns/01 that leaks water on the floor. A serviceman suggested replacing the water line from the door dispenser to under the fridge. Can I buy the tubing from Home Depot? Do I need to buy clamps or fittings also? Is the repair accessible from the front and back of the fridge, or do I need to go underneath it? If I need to replace the entire water tank, how do I do that, and is it doable for a mechanical layman?
June 20th, 2023
I have a French Door Samsung Refrigerator. After cleaning it, the indicator lights on the door are not turned on. They used to be on all the time. What do I do to turn them back on?
September 26th, 2023
What does the error F2 mean when the oven is cleaning, and what should I do to stop the oven from displaying this error?
November 18th, 2024
I have a Maytag dryer model MDG3706AWW, about 11 years old, where the timer won't advance in the auto dry mode but will in timed drying modes. I replaced the cycling thermostat, but the issue persists. The dryer still takes a long time to complete the auto cycles, even with the vent hose removed and the lint path cleaned. What could be causing this and how can I troubleshoot it further?
June 25th, 2024
