asked

I have a Whirlpool Duet Sport washer that won't drain properly. I've already cleaned out the pump trap, but it still drains very slowly. What could be causing this issue, and what steps can I take to fix it?

July 27th, 2023

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

We have a Bosch Classic Electronic dishwasher approximately 4-5 years old. The check water light illuminated on the front panel. After replacing the inlet solenoid, water is now escaping from a hole at the top right of the clear plastic compartment where the inlet hose attaches. Water flows through this to the next plastic compartment (blue) which includes the float mechanism. The float is not rising due to insufficient water entering the chamber, causing the water to overflow out of the hole. What actions can be taken to resolve this issue?

February 24th, 2023

I have a Whirlpool duet gas dryer model GGW9250PW2 that heats but doesn't get hot enough to completely dry clothes. What could be the issue and what steps should I take to diagnose and fix it?

February 19th, 2024

My dishwasher won't drain all the way. I replaced the drain pump and checked for any obstructions in the drain line. I completely removed the drain to make sure it had no blockage, which it doesn't. What else could be causing this problem? I have a KitchenAid dishwasher model # XXXXX.

June 29th, 2024

I have a Gaggeneau KG103-8 cooktop with 2 burners that won't stay lit. I've replaced the thermocouples, but the issue persists. I suspect it's the gas valve, but Gaggeneau says it's no longer made and can't be repaired. Are there any sources for used parts for this model? If not, the cost to replace the entire unit is significant, and it works fine otherwise.

September 9th, 2023

I have a KitchenAid refrigerator where the compressor or the condenser fan is not running at all. The internal fan is running, and both the freezer and refrigerator are warm. We have good power to the fridge, and the internal light and display are all working. Is it the main circuit board in the back that has gone bad?

September 12th, 2023