asked
I have a Whirlpool Gas Range Model # SF357PEKQ1. The burners light fine, but the oven and broiler won't light. I replaced the gas valve and the oven ignitor spark electrode, but the issue persists. The oven doesn't engage the lock in self-clean mode, and I'm getting an error code F5E1 on the display. What could be the problem, and what should I check or replace next?
November 5th, 2023
I have a KitchenAid KFIS25 refrigerator. After a power outage, the display control panel (ice/water) dispenser stopped working properly. It beeps continuously when the dispenser lever is pushed and doesn't dispense ice or water. The light occasionally comes on and goes off. Is there a way to reset it?
June 20th, 2023
My Duet washer machine stops working shortly after starting a wash cycle. The pump was clogged with coins and debris, and I have already replaced the pump and the main board. What could be the issue?
October 13th, 2023
I have a Whirlpool dishwasher, model WDF769SADW, which is 2-3 years old. It has an odor issue and a recurring black substance around the bottom of the door. What could be causing this and how can I fix it?
April 17th, 2024
I am trying to troubleshoot an HE error with a Samsung dryer (model DV203AES/XAS). I have tested the amperage/continuity on all heating components, which are all good. The dryer heater works when the relay switch is jumped, but only for a short time before the HE error occurs. I replaced the relay on the circuit board, but the dryer still does not run. What could be causing the issue, and what should I do next?
May 18th, 2023
I have a Whirlpool WFW9600TA00 washer that got stuck in the cleaning cycle after I interrupted it and added a towel. The washer displays an 'int' code and cannot be reset, even after unplugging it for an hour. The timer counts down to 1 minute and stops, with no water flow or drum movement. How can I reset the washer, and if necessary, replace the interface control board?
May 24th, 2024