Noah N. asked
I have a Whirlpool Gold GH4184XSS-O over-the-range 1000W microwave with the following issues: lights and humming function, but no turntable movement; power cord sparked at the outlet; microwave nonfunctional; replaced 20A fuse twice; noticed a broken peg holding one of the interlock switches, replaced it and had all three switches checked; followed wiring diagram, replaced interlock, replaced fuse, reconnected board; programmed clock, tested lights, fan, etc., all functioned normally; placed a cup of water in the unit for a test and turned it on for one minute, turntable worked fine but a loud, unusual noise came from the unit; discontinued the test after 20 seconds; water was still cold, but non-cooking functions still worked properly. What could be causing the loud noise and how should I proceed?
August 8th, 2024
Mary M. answered
The loud noise, often described as 'growling,' is typically caused by a failed high voltage componen...
August 8th, 2024
Create an account to view answers and interact with the community!
I have a top loader Magtag washer, Bravo series. It starts washing but then stops agitating, starts making a grinding sound, and the center stops agitating. When set on spin cycle, it moves to the right and left without spinning fully, and it grinds. The bottom looks like it's jumping off the track. I also get an F51 code. What could be the issue and how can it be fixed?
October 19th, 2024
My Samsung refrigerator (Model RS2630SH/XAA) shut down and only the lights inside are on. Nothing responds from the front control panel. Any ideas?
March 5th, 2023
My Bosch dishwasher stopped mid-cycle and now won't power on if the door is closed. The panel on the front powers on if the door is open, but loses power when the door closes. What could be causing this issue and how can I fix it?
September 27th, 2023
I need to replace the ignition control switch on a gas cooktop model JGP636. How do I access the switch?
November 11th, 2023
I have a Bosch Maxx Comfort WFR 3230 washing machine with mold on the rubber door seal. The tenants have left the door closed and not wiped the seal or aired out the machine. I have tried white vinegar and baking soda but the mold remains. What are your suggestions for detergents and maintenance to keep the machine mold-free, and if I need to replace the seal, who can do this in my area (Hastings, New Zealand)?
March 14th, 2023