asked
I have a Whirlpool WFW5605MW washer. The door will not lock and it keeps showing 'Lock Door' with a red wrench icon next to it. I have tried shutting the door several times and even used a screwdriver to ensure the latch mechanism was working, but now the door doesn’t 'catch' at all and won’t stay shut. What could be the issue and how can I resolve it?
December 14th, 2023
What is the minimum duration of the dry-only cycle of the HAIER i-Pro Series 7 HWD100-B14979 for a 5kg load, and is it possible to stop the drying cycle at any point to check if the clothes are dry?
April 17th, 2024
My Magic Chef portable washer is not doing the spin cycle and doesn't let any water out. When I manually engaged the thrust bearing, it started spinning and draining. What part do I need to fix this issue?
January 13th, 2023
I have a Kenmore gas dryer with model number KGD9118WA, manufactured by LG. The issue is that the igniter glows for 3 seconds and then goes out, and the dryer won't send power to the igniter. I tested the voltage with a multimeter, and it drops to 0 after 3 seconds. The flame sensor and high thermostat both give readings of 0.00 and have continuity. The gas valve coils have good resistance. The voltage on the first gas valve coil remains at 0 Volt when the dryer starts running. If I unplug the power for a while, sometimes the dryer can ignite and run normally. What could be causing this issue, and should I replace the mainboard or the gas valve?
October 31st, 2023
The display on my Frigidaire Gallery range is showing F11 error and beeping. The burner is off, and I have hit cancel numerous times. The display had timed flash. How can I resolve this issue?
April 30th, 2023
When I try to turn on my three-year-old Whirlpool front-loading washer, the 'lock' signal comes on. The washer is not overloaded, and there are no items overlapping the opening. This is the first time this has happened, and I have only checked that the door is closed tightly and that there are no items caught in it. What could be the issue?
December 4th, 2023