asked

I have an LE error code on my LG WM3170CW washing machine. I have tried unplugging, holding the start button for 5-10 seconds, and replugging, but the error reappears after the machine fills. What could be causing this and how can I fix it?

June 16th, 2024

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

My washer filled up with water, and after leaving the lid up, it started making a running noise with no water and no lights on. I couldn't cancel it and had to unplug it. When I plugged it back in, the same issue occurred. What could be causing this and how can I fix it?

May 20th, 2023

My refrigerator and freezer aren't staying cold. I cleaned the coils with an air compressor and vacuumed them today. The appliance is about 6 years old. What could be the issue and what should I do next?

June 28th, 2023

We have a side-by-side fridge with settings set to 0 and 37 degrees as recommended, but the temperatures keep rising to 23 in the freezer and 52 in the fridge. The model is GS25GSHJCSS, and this issue started yesterday. We have tried resetting the temperatures several times, but they keep returning to the higher settings. What could be causing this issue, and what steps can we take to resolve it?

October 6th, 2024

I have a Maytag refrigerator, model #MRT118FFFH08, that has been experiencing excessive condensate for the past 2 weeks. There is some frost over the vent, moisture on the ceiling of the fridge near the back, and moisture on the glass shelves. The fridge is 2 weeks old and seems to be cooling properly, with the room temperature at 70°F, fridge at 39°F, and freezer at 0°F. The gaskets appear to be sealing properly. What could be causing this issue and what should I do?

April 18th, 2024

I have run the self diagnostic test for Maytag MFW2055FRZ and everything checks out OK, but there is frost build-up and fan ticks after about 2 to 3 weeks. I put it into diagnostic mode and entered number 5 heater on for two cycles of 20 minutes each, emptied the catch tray, and exited diagnostic mode. The door seals look ok. What more can I check?

September 26th, 2024