asked
My burner worked once and hasn't worked since. I didn't replace anything because I was told replacing the ignitor is not a DIY project. I have used a lighter to light the burner whenever I needed it. The burner clicks like the rest but doesn't light. I tried clearing the holes on the side of the burner where the gas comes out, but it didn't help. I noticed the white plastic sleeve around the ignitor is cracked. Could that be the issue, and if so, is it a DIY project to replace it?
March 14th, 2023
How do I check the fan motor and control board?
February 14th, 2023
I own a Kenmore HE2 Electric Dryer. It worked fine yesterday, but today it won't start. The power is on, the digital timer displays correctly, but when I push the START button, it makes a small 'click' sound and won't turn on. What could be the issue and what can I do to troubleshoot it?
October 27th, 2024
My GE Profile Side-by-side built-in refrigerator (PSB48LSRABV) freezer is too warm (set point 0 degrees, actual temp varies from 10-30 degrees). The freezer door is closed, and the compartment is about 3/4 full of frozen food. The fresh compartment temperature is fine (37 degrees +- 1 degree). I have already checked the door seals, condenser, sensors, fan speed, and defrost heaters, all of which are OK. The compressor runs at reduced speed, and the temperature drops by 6 degrees in one hour when the compressor runs at 100%. What could be causing this issue, and are there any other tests I should perform before considering replacing the Power Control Board?
April 6th, 2023
I have a Keurig B-70 and when I press start, the water does not stop coming out. What could be the issue and what should I do?
June 15th, 2023
My Whirlpool washing machine (model #6ALSR744JQ1) is washing but does not spin or drain at the end of the cycle. Could this be related to a door switch malfunction? Any help would be greatly appreciated.
August 26th, 2024