Isaac J. asked
My Fisher Paykel lower drawer recently started making a very loud sound during the fill cycle. Once the water has filled and the regular wash cycle starts, the noise level is at its normal level. After completing the entire cleaning cycle, it now displays a wrench symbol. There are no other error codes, just the wrench. Which water valve could this be or is it a different problem?
June 8th, 2024
Breanna O. answered
The loud noise during the fill cycle and the wrench symbol displayed after the cleaning cycle indica...
June 8th, 2024
Create an account to view answers and interact with the community!
We have an LG portable air conditioner (Model LP1213GXR) that is 2 years old but was not used last year. It operates but does not produce cool air. Can you help?
March 14th, 2023
My Whirlpool top load washer keeps displaying a code U6. I tried unplugging it for 5 minutes to do a hard reset, but the issue persists. The washer seems to be overloaded and wobbly during the spin cycle. What could be causing this and how can it be fixed?
May 14th, 2023
The temperature display inside my KitchenAid refrigerator (15 years old, model KSCS23INSS01) shows zero for both the freezer and cooler compartments, and now the display is completely black. The actual temperature in each compartment seems okay, and there is no food spoilage. Is there a reset for the display, and what could be the issue?
April 13th, 2023
I have a lot of leftover lint on clothes after washing. My Series 80 Kenmore top loader is quite old. We are trying to remove the agitator to clean it. Is the inner lug nut on the agitator a righty tighty, lefty loosy nut or a left-threaded one? Where else might lint be collecting in the tub or drain outlet?
March 26th, 2024
We have a ten-year-old Kenmore 970-C45072 front-loading washer that recently stopped spinning. It drains perfectly, the door lock works (light comes on and door locks during the final spin/drain cycle), and the filter and pump are clean. We suspect it could be the main control board, motor control unit, or a balance sensor. What could be the issue, and what steps should we take to diagnose and potentially fix it?
August 14th, 2024
