asked
My GE Dishwasher GDT695SSJ2SS with a CSM module is tripping intermittently. The dishwasher is about 4 years old, and the issue started after replacing the heating element. The element passes all service mode tests but still trips randomly, especially around 6 minutes into the cycle. Could the new heater be defective, or should I replace the main board as well?
October 11th, 2024
I have a Whirlpool WDT750SHAZ dishwasher that is 7 months old and has started leaking soapy water. What could be the cause of this leak, and what should I do?
February 13th, 2023
I have an Amana top load washer. It fills the agitator engages but sounds like something is kicking out before it spins. But it's giving me an error code F3-E2 which doesn't make sense for the problem. It fills but won't spin, and I heard a grinding noise initially before it happened. What could be the issue and what should I do to fix it?
April 8th, 2023
How many MFD should a capacitor read, and is it acceptable to have a reading within plus or minus 5% of the specified value?
May 1st, 2023
The user display/knob on my dishwasher is unresponsive. The dishwasher still washes, but the pad doesn't react; it's lit up with a green clean light. Sometimes, it works after unplugging and playing with the knob, but it's inconsistent. Additionally, there is no heat, and the element seems to have an issue with continuity. What could be the problem, and what parts do I need to replace?
June 21st, 2024
I tried to use the self-clean feature on my oven, but it made a loud buzzing noise when the door was locking. I canceled the cleaning process by pushing clear all, and the door lock light went off, but the door is still locked. I unplugged the oven for a few minutes and tried clearing it again, but the door remains locked. The display showed an F93 error code when I first tried to activate the clean feature. What could be causing this issue, and how can I fix it?
March 13th, 2023