asked
My Jenn-Air JGS8860BPD touch panel is malfunctioning. Only the 1, 2, 3, 4, 5, 6, and 0 keys make a beep sound when pressed, while all other buttons do not work. Additionally, the 'setup' button stopped working several months ago, and now all other buttons are out as well. Is this a problem with the touch panel itself or the electronic circuit board?
April 4th, 2024
Samsung refrigerator model RF266ABRS/XAA had a power failure, now the compressor and fans are running but the display shows 88's on both sides. The refrigerator display alternates between 88 and 86. Can't reset. Is the main control panel bad?
April 24th, 2023
I have a Bosch dishwasher (serial number SHE43M02UC/53) that runs down to '1' and then keeps running without draining, and it doesn't generate heat. I believe I need to replace the control module. Before ordering the control module (which costs over $100), I want to be confident that I've correctly identified the problem and ordered the right part. Additionally, can a DIYer replace the control module?
May 1st, 2024
I have a Maytag A207 washer with a bad motor. Can I replace it with a 1-speed motor, and are the wire colors the same except for the low-speed wire?
August 5th, 2023
I have a Jennair SVE47600B downdraft range where everything stopped working except the top burners. I replaced the clock and touchpad, but the problem persists. What could be the issue and how can I fix it?
April 30th, 2024
I have a Miele W765. After years of service, the machine does not spin with a load, but it spins without a load. The timer progresses to the end without any action, and the bearing seems a bit noisy. Can not detect any play. Is it just a drop of grease needed?
May 2nd, 2024