Samuel G. asked
My Kenmore Elite Ultra Wash model () -# was not draining after a complete wash & dry cycle and it would not pump when the cancel button was pushed. I cleaned out the filters and confirmed the drain hose was not obstructed. I have just replaced the discharge pump but now it will still not drain after completing its final cycle. When I hit the cancel, the pump activates and drains all the water out. What could be the issue?
March 26th, 2023
Jason H. answered
The issue is likely with the main control board itself. The control board inside the door is not sig...
March 26th, 2023
Create an account to view answers and interact with the community!
Where can I order a rubber plug for a Miele Novotronics 1570 C dryer?
September 19th, 2024
My Kenmore 110-82822102 front load dryer runs but doesn't heat. I've checked the heater, high limit thermostat, thermal cutoff, and thermistor. What could be the issue and what should I check next?
August 7th, 2024
My dryer starts fine for the first load, but won't start right after the first load. If I hold the door button down and turn the drum, it starts right away; otherwise, it takes 10 or 15 minutes to start after it cools down. What could be the issue?
January 23rd, 2024
My Kenmore Elite refrigerator has a digital display that says the refrigerator and freezer are off. What do I do to turn it back on?
August 6th, 2024
I'm considering buying a Dacor model MC52275 stainless steel double wall oven. Can you tell me how old this model might be, whether I can get an installation manual, and whether I can get parts for it?
February 12th, 2024
