asked
My Kenmore HE2 Plus washer completes wash cycles but takes a very long time, especially towards the end of the cycle. The timer reads 28 minutes for an express cycle but slows down significantly in the last few minutes, sometimes taking up to 45 minutes to complete. I previously had a code 21 issue which was fixed by replacing the pump. I've checked the wiring and pressure switch, and the screens are clean with good pressure at the end of the hose. What could be causing this delay and how can I fix it?
July 28th, 2023
I have an Amana front load washer (model NFW7200TW, at least 5 years old) that is stuck in the LO error code and the door won't unlock. I've already tried removing the top to access the lock from the inside and pressed down on the locking mechanism, which caused a clip to break. Now, the DS error code is displayed. What should I do to fix this issue?
January 12th, 2024
My bottom stitches are very loose on my Phaff 332 sewing machine. How do I set the tension? The top stitch seems fine, but the bottom stitch is very loose.
May 20th, 2023
My Frigidaire Affinity washer (model #FAFS4174NRO) is stuck in pause mode, flashing between pause and door locked even with the door open. The display is responsive, but the washer won't continue the wash cycle. How can I fix this issue?
February 19th, 2023
I have a Whirlpool fridge with a bottom freezer and an ice maker. I am hearing a vibration noise only when the door is closed, and the noise can also be triggered by pressing the light button when the door is open. What could be causing this noise?
October 26th, 2023
I have a Kenmore washer model ***********. It powers up, allows me to select a cycle, and locks the door when I push start, but nothing happens. The error code is F21. When I select the drain cycle, the pump doesn't start, and there's no power at the wires except for 7 volts. Additionally, I'm not getting water when I choose a regular cycle. What could be the issue?
August 9th, 2024