Angelica A. asked
My Kitchenaid 'Superba?' KUDS01FL dishwasher works great but won't start after sitting for a while. The LEDs do not blink to indicate the start of a cycle, but the cancel cycle always works. The machine will usually run any program after reassembling the door/control panel. Does this machine have a memory that can be cleared?
February 14th, 2023
Christopher D. answered
The issue is likely due to a faulty touchpad, specifically the start key, which is commonly used and...
February 14th, 2023
Create an account to view answers and interact with the community!
My Miele dishwasher works most of the time, but sometimes it stops before the soap dispenser opens and the INTAKE/DRAIN light flashes. It usually works if we start it again. Can you diagnose this problem?
September 6th, 2024
I have a Samsung dishwasher model # ***** that always stops and starts flashing 'smart auto' no matter what wash mode I set. I have tried resetting it by shutting off the power, but it didn't work. The manufacturer suggested it might be a water supply fault code, but my water supply is fine. The dishwasher supplies water for 3-5 seconds, then drains for another 3-5 seconds before stopping and flashing the code. What could be causing this issue and how can I fix it?
September 4th, 2023
My LG Refrigerator Model #LMX25981ST is showing an Er 1F error on the control panel, but the fridge is working normally and the freezer drawers are fine. I cannot set the temperature and have tried resetting it by unplugging the fridge for 10 seconds and plugging it back in. What could be causing this error and how can I fix it?
March 6th, 2023
Kenmore Elite 665.13153k701 dishwasher has no power to the inlet valve and doesn't fill. The inlet valve has been replaced, there is water pressure at the valve, the line is not clogged, and a voltmeter test shows no voltage when the valve should be open, with no sound of relay operation or vibration.
June 26th, 2024
The digital indicators over the burner knobs of my Range Model PLES389ECC electric range flicker, and the burners do not heat when rotated. What is the problem, and do I need a new control board for the unit?
April 15th, 2024