asked
My Whirlpool tumblefresh 4.4 (model WFW9550WR00) keeps flashing and the door locks when the cycle stops. I have tried unplugging, waiting, and replugging, but the lights still blink. The door remains locked even after powering off and on. Sometimes the cycle works perfectly, but other times it stops after a few minutes. Why does this happen and what can I do to fix it?
July 11th, 2023
I have a Kenmore portable dishwasher that doesn't drain. I've tested the drain pump motor, which runs, and I've replaced the pump with one from a similar unit, but it still doesn't drain. I've also checked the rubber check valve in the motor assembly, which seems fine. Is there another check valve I might be missing, or could there be another issue causing the problem?
April 21st, 2023
Neither the freezer nor refrigerator are cold. The compressor is slightly warm, the condenser fan is on, but the line between the compressor and condenser is not hot. Could this be a refrigerant leak, a compressor problem, or something else? The fridge is a GE French door model with a lower freezer compartment, and I'm not sure of its exact age or model number.
January 23rd, 2024
My Samsung 3-door fridge model RF26HFENDSR is displaying an Error 33 code. What does this mean, and what steps should I take to resolve it?
April 8th, 2023
I have a Whirlpool DU915PWWS1 dishwasher that is leaking near the door and splashing water during wash cycles. The door seal is not cracked, and there is minimal soap buildup. The pump and hose connections are not leaking. What could be causing this issue, and how can I fix it?
March 25th, 2024
I'm replacing a 16-year-old 30" wall oven with a Whirlpool model. The manual calls for a 24" cutout depth, but mine is actually 23-7/16". The actual oven depth is 23.0" (plus 1/8" for screw heads). Will it be safe as is, or must I install a shim around the outside border to bring the depth to 24"? Additionally, the manual calls for a piece of foam tape behind the control panel, but it's missing, and the part number does not exist. What should I use for this?
March 26th, 2023