asked
The door won’t stay closed on my microwave. The model is Kenmore 790.80333310, less than 5 years old. The issue has been ongoing for a few weeks, and I've removed the panel that snaps over the hooks. The door appears to close but then starts running without being programmed, and the microwave doesn't heat up. Sometimes it indicates the door is open when it's closed, and the issue seems to be exacerbated by slamming doors. What could be the problem and how can I fix it?
March 2nd, 2023
How do I install the natural gas pressure regulator on my KitchenAid 5 burner built-in grill, and is there a specific orientation for the regulator?
February 5th, 2023
I have a Frigidaire washing machine, model FTFB4000FS1, that is about 10 years old. Recently, when using the quick wash mode, the right-hand side with door lock, wash, rinse, and final spin lights up and beeps every 4 minutes. The cycle signal is lit, but the beeping is annoying. The wash completes fine except for the constant beeping. What could be causing this issue and what can I do to fix it?
June 19th, 2024
My Duet Whirlpool washer is displaying an F33 code, the door is locked, and I can't retrieve my clothes. I've tried resetting the washer by unplugging it and turning off the breaker, but the issue persists. The washer started showing the problem yesterday, and I've already drained as much water as possible from the drain hose. The machine is now flashing the time left in the last cycle. What should I do to resolve this issue?
December 23rd, 2024
I had a sewer clog that caused sewage to backup into my washing machine. Can it be cleaned, sanitized, and disinfected, or must I get rid of it? The washer is top-loading and about 5-10 years old. It happened this afternoon with about 5-8 inches of sewage in it. I emptied it and ran a sanitize cycle with bleach, detergent, and very hot water. How can I ensure there are no remaining bacteria in the machine and no residual contamination?
July 31st, 2023
I have a fault showing EC032 on my Bosch circuit breaker. I tried resetting it by turning off the circuit breaker, but now it shows a phone number which is not open today. The original fault was 'too many buttons pushed.' How can I resolve this issue?
October 2nd, 2023