asked
Washer overload - le code. Drum will move freely when machine stopped and empty. It will only move an inch or two for about two attempts, then comes the le code. I've let it rest overnight, then tried it from scratch with a light load, but no dice. It moves a little, seems to shudder a bit, and then gives up. No unusual sounds.
March 14th, 2024
My Whirlpool washer only runs for the first 10 minutes before flashing an LF error code. It's a top-loading model that's over 10 years old. What could be causing this issue and what should I check or try?
August 23rd, 2023
My GE dishwasher (model GDT625PSJOSS, about 3 years old) intermittently loses power during cycles, especially after being unplugged due to a nearby flood. It sometimes completes cycles normally. What could be causing this issue and what steps can I take to diagnose and potentially fix it?
November 20th, 2023
My Whirlpool dishwasher, model number GU1200XTLQ2, was not draining properly so I took it apart to clean it. After reassembling it, the control buttons will not light up or activate anything. I am a journeyman electrician with 30 years of experience and have checked incoming power and all the way through the door switches, which all check good. I have also verified that the fuse is good and that voltage is going through. What could be causing this issue and how can I resolve it?
September 21st, 2024
My Panasonic microwave is locked and I don't know how to unlock it. The microwave does nothing and I cannot open it. How do I unlock my microwave and open the door?
November 12th, 2023
I replaced the thermostat but the issue persists. The dryer igniter glows red, lights, then goes off, and cycles on and off. After running for about 10 minutes, it gets cold. What could be the problem and how can I diagnose it?
February 26th, 2024