Christian W. asked
We have a Maytag dryer, Bravos XL steam model MOD MEDB87DWW2, purchased in 2017. It takes a very long time to dry clothes, and often they still feel damp at the end of the cycle even with the steam function off. The dryer vent was cleaned last fall, which helped a little. What could be causing this issue, and what can be done to resolve it?
June 28th, 2024
Elizabeth R. answered
The prolonged drying time and damp clothes are most likely due to a clogged dryer vent. Here are the...
June 28th, 2024
Create an account to view answers and interact with the community!
My electricity went off and now my Samsung RF28R7201SRAA refrigerator won't come back on. Where do I go to reset it?
July 28th, 2023
My Jenn-Air oven, model S156, is 30 years old and has an issue where the actual temperature may be off by +/- 50 degrees from the set temperature. I have tried using an external thermometer and adjusting the switch to maintain the correct temperature. I also tried finding a new thermostat, but it has been discontinued. What could be causing this issue, and how can I diagnose and potentially fix it?
November 6th, 2024
After loading the wash machine and putting liquid laundry detergent in the compartment, pressing the start button resulted in multiple clicks but the machine did not start. The wash machine model is WFW94HEX and is 9 years old. This is the first time this has happened. What could be the issue and how can it be resolved?
October 31st, 2023
I have installed an AEG33121501 part in my AWM2101HW front-loader washer, but it is leaking. The washer is about 10 years old, and I have inspected the front door seal and water intake hose. The leak is coming from the bottom of the thermistor, and I have replaced it with an AEG33121601 part, which solved the TE error code but still causes leakage. What could be the issue, and is there a difference between the AEG33121501 and AEG33121601 parts?
December 7th, 2024
The control panel of my Avm4160 microwave does not have a lighted service. Since the oven was installed, I had no idea how to attempt to correct the issue. What can be done about this?
February 14th, 2023
