asked
We have a multi-stove burner made of cast iron. We had issues with creosote, which we resolved by ensuring it burns hot enough and by opening dampers for more oxygen. However, now we have a problem with the last flue, which is rising about 50 mm upwards from the joint. What could cause this?
June 16th, 2023
My dishwasher is not starting but is getting power. It runs through the reset sequence and processes water, but doesn't start after the reset. I've also tried turning off the breaker for 30 minutes to reset it with no luck. What should I do?
March 26th, 2024
I'm looking for a magnetron for a 1988 Thermador #cmt231wc oven/microwave. Is it still available, and if not, can the part number be crossed to find a compatible magnetron?
November 21st, 2024
We have a front loader washing machine where the drum seems to be eating the inside rubber and getting hot smelling when you take out the load of laundry (any size). What could be causing this and what should we check?
July 8th, 2023
There is rust showing up on the top edge of the bottom front panel below the door on a front-load Maytag washer, model MFW9600SQ0. The washer works fine, but I'm concerned about rust damage. Is it easy to repair, and what could be causing the rust?
April 21st, 2023
I rent a condo in Panama with an Ariston AW 129 washing machine that is approximately 4 years old. The machine intermittently stops working and the lights begin flashing every four loads. I unplug the machine as per the manual instructions and plug it back in, but it may or may not work again. What could be causing this issue and what steps can I take to diagnose and potentially fix it?
February 4th, 2023