Brandon H. asked
We have an LG LMX25899ST refrigerator that recently stopped dispensing water and making ice. Water flows past the 1st valve at the bottom, into and out of the filter, and to the 2nd valve in the door. A bench test of the 2nd valve shows both sides open when powered. The ice maker will make ice when manually filled but won't dispense from the door. What should I look at next?
May 10th, 2024
Sierra S. answered
The issue is likely related to the control lock being on, but since you've confirmed it's not, the n...
May 10th, 2024
Create an account to view answers and interact with the community!
I have a Samsung Chef Collection refrigerator model RF34H9960S4/AA. After moving the refrigerator, the freezers are heating up, the lights do not turn on, but the control functions on the right lower freezer door are lit. What could be causing this issue and how can I fix it?
November 14th, 2024
After going through the wash cycle, my clothes are still soaking wet. It appears to have spun, but not fast enough to get the water out. My washer is a top-load Maytag MVWC565FX0. It has been going on for less than a month. I have changed the gearcase, but the issue persists. What could be the problem, and what should I check or try next?
February 4th, 2023
Model 106.51133213 does not make any ice. The ice maker's on/off button has been moved, and the ice tray does not fill with water. What could be the issue and what should I check?
July 24th, 2023
My 1971 Roper oven suddenly stopped heating. The pilot light is still on and the oven light illuminates, but the heat won't come on. I had a mouse problem in the cabinet below the oven, and after trying to cover a hole, the drawer wouldn't close properly. My son removed the steel wool and duct tape, and a few days later, the oven stopped working. The pilot light is still burning, indicating there is still gas, but it doesn't cook anything. What could be the issue and what should I check?
January 31st, 2023
The oven burner flame oscillates, sometimes it is fine, but other times the flame lights but goes from high to low, almost out. The igniter works fine, the burner is in good shape, no rust or blockages. We put a pin in every hole and blew out the burner with air for cobwebs. What could be causing this issue and what can be done to fix it?
July 6th, 2023
