Christopher C. asked

🔌  Appliance

Why does my Maytag dishwasher (model DWU6702AAM) emit a bad odor when it's not in use?

September 5th, 2024

Jessica R. answered

The bad odor in your Maytag dishwasher is likely due to a buildup of bacteria and mold when the mach...

September 5th, 2024

Sign Up to View Full Expert Answers

Create an account to view answers and interact with the community!

🔌Related Questions

I am fixing a Victory refrigerator with a compressor that turns on and off every 3-4 minutes, and the temperature won't cool down. The previous technician added a 3 in 1 starter kit, and the pressure is 40 psi low side and 200 psi high side. The compressor terminal has continuity, and there are no low or high pressure switches. The condenser coil, condenser fan, and evaporator fan are all working. What could be causing this issue, and what steps should I take to diagnose and fix it?

December 11th, 2024

I need to replace the drain hose in my Frigidaire dishwasher as a mouse chewed it up. Can I find adequate hoses and hose ends at the hardware store to make a replacement or should I order a replacement part from the manufacturer? I have removed the hose and it's about seven feet long with black rubber bushings at each end.

September 29th, 2024

My KitchenAid model KSRA22ILSS01 refrigerator compressor is not running. The compressor is very hot, and the relay/overload/starter is discolored and smells burned up. How can I tell if the compressor is still good and whether just the relay/overload/starter components need to be replaced?

November 21st, 2023

I have a Frigidaire that I bought in August and placed on a patio. It has stopped working, and we live in LaGrange, Texas. What could be the issue, and how can I troubleshoot it?

March 1st, 2024

I have an LG dishwasher model 3850DD3006E. After replacing the water inlet solenoid, it doesn't close when the washer is powered on, and I'm getting constant 120 volts at the solenoid even when the washer is off. I've checked the float switches and they seem fine. I suspect the main board might be the issue, but I want to confirm before ordering a $200 part. Is there anything between the main board and the water inlet solenoid that could cause this issue?

March 22nd, 2023