I am having a problem with my Bosch SilencePlus 48 dba dishwasher. No matter what I do, there seems to be a deposit of fine grit on my glasses. I am using the recommended detergent and rinse aid, cleaning the filter basket every cycle, and ensuring proper loading. What else can I do?
January 19th, 2024
I set the low water level setting on the VLSR1090G8 WW on a hot point washer. Once the low setting is satisfied, the suspension support touches the bottom base without a load. I replaced two suspension rods, but the problem wasn't fixed. Should I replace all four suspension rods?
April 19th, 2023
I have a Frigidaire combination washer and dryer model FEX831CS0. The problem is with the dryer; it runs for a few minutes and then shuts off. It heats up okay, but even in cool-down mode (no heat), it does the same thing. I removed the tension from the motor and the belt, but it still runs for a few minutes and shuts off. What do you think?
August 1st, 2024
We have a Kenmore Coldspot model # XXXXX manufactured 10-01. The ice maker is working, but in addition to ice, there are two leaks or slow drips. One is in the middle and causes a mound of ice to form in the middle of the bin. The second is in the back and causes the bin to freeze to the back of the refrigerator and creates a mound in the back. These mounds usually develop within 24 hours. Do I need to replace the entire ice maker?
January 29th, 2023
I have just bought a Kenmore Elite C790-600431 double convection oven and cannot get the top burners to work except for the warming burner. All the oven features and the clock are working. The lockout feature is not on and the burners still do not work. I have also tried putting a pot on the burner first and then tried turning the burner on and they still do not come on. Our stove is not equipped with the Sabbath feature. What could be the issue and what should I do?
June 18th, 2024
My dryer runs briefly then stops, with panel lights flashing. The lint pipe is clean, the basket is free of lint, and the drum turns when started. What could be the issue?
February 27th, 2023