asked
I have a GE gas range Model xl44 - RGB524PPA2wh. My oven is not lighting. The gas pilot stays lit, and when I turn the oven temp knob up, a larger pilot burns, but nothing happens after several minutes. I think the part I need is #214 on the diagram, the safety valve. Does this seem right? The stove has standing pilots and no electrical hook-up. I live in remote Alaska, so I can't call for service or bring it in. I removed the part and took pictures of it. I'd hate to have to throw out my whole range just for one small metal part. Even if the part costs almost as much as I paid for the whole unit. Thanks so much. Matty
July 23rd, 2024
Whirlpool Refrigerator: Only the bottom light is working, and the top light is not coming on even after replacing the bulb. The door switch is activating the bottom light correctly. What could be the issue and how can it be resolved?
June 29th, 2023
I have a GE Cafe gas stove with self-cleaning and gas lockout functions. When using these functions, there is a creaking sound from the gas valve, the display shows LOC (Lockout Control) flashing, and the stove becomes unresponsive. The only way to reset it is by unplugging and plugging it back in. A local technician found a dead micro switch on the oven door latch, but I don't believe this explains the behavior. What could be causing this issue and how can it be resolved?
October 31st, 2024
I have a Whirlpool washer, model LSQ8543J, and the agitator is not working during the wash and spin cycles. The motor is still running. What could be the problem and what should I do?
February 16th, 2024
I have a Maytag HDE606 electric dryer that has stopped heating. I suspect the heating element needs to be replaced. Where is the heating element located, and how can I access it to perform a continuity check?
August 27th, 2024
I have a Premier brand range/oven that is about 15 years old and not used often. The oven temperature has always been higher than the dial setting. I made a chart of dial settings and actual temperatures: 100=275, 150=325, 200=375, 250=425, 300=500. The oven turns off when the dial is off and the broiler turns on when set to Broil. I checked the capillary bulb, temperature control, foil use, and vent, but they don't seem to be the issue. The knob has no calibration screw, and the probe is not broken or touching other metal parts. How can I calibrate the knob without affecting the 'Off' and 'Broil' positions? Is it possible the probe is damaged but not broken? How do I determine if the probe needs replacement and how do I replace it if necessary?
April 7th, 2023