Michael W. asked
I have a Maytag Atlantis clothes washer where only the center arm (agitator) spins, but not the tub. What could be the issue and what should I check?
February 22nd, 2024
Michael A. answered
The issue is likely due to the agitator being broken. The agitator screws onto the shaft of the tran...
February 22nd, 2024
Create an account to view answers and interact with the community!
I installed a new inlet valve, but now the washer only uses hot water, regardless of the temperature setting. No water flows through the cold water hose, even though both hoses are correctly connected and the faucets are on. I ensured the wires were correctly reconnected during installation. What could be causing this issue?
May 22nd, 2023
My igniters on the four burners of my PCS484wk are not functioning, while the igniter for the wok is working. One by one, the burner igniters stopped working, and now there is no spark on any of them. The cooktop is about 8 years old and in perfect condition otherwise. The igniters are not broken. What could be the issue, and do I need to replace a control box? If so, what is the part number?
August 29th, 2024
My GE microwave has the white finish/paint blistering and peeling in the bottom. Is it still safe to use or do I need to dispose of it and purchase another? What might have caused the problem, and should I replace it given its low cost and age?
October 30th, 2024
I have a GE side-by-side fridge model GSL25JFPA BS. The push button on the ice dispenser doesn't work, and the motor doesn't turn. The ice maker was overflowing, so we had to turn it off occasionally. Now, we're not getting any ice, even though there is ice in the maker but it won't drop. What could be the issue, and what steps should I take to diagnose and potentially fix it?
August 3rd, 2024
I have a Kenmore Elite Dishwasher Model 665.15972992. The 'lock on' light is on and blinking. I tried to reset by pushing and holding the 'No Heat Dry' button (as instructed in the manual), but it will not reset. The light continues to flash and the machine will not operate. I tried shutting off power (breaker) and let it sit for a while. No results. Any suggestions?
October 10th, 2023