Hunter C. asked
I have a Whirlpool refrigerator freezer on the bottom, about 8 to 10 years old, with no ice maker. It's a 22 cu ft model, and I've noticed occasional water leaking at the front corner. I've cleaned the condenser coils and checked that the freezer door shuts properly. I can't find a pan underneath, and I'm not sure if there should be one. What could be causing the water leak, and how can I fix it?
May 22nd, 2023
Jennifer W. answered
The water leak in your Whirlpool refrigerator could be due to several issues, such as a clogged defr...
May 22nd, 2023
Create an account to view answers and interact with the community!
We have an upright bottom freezer model. Currently, the freezer is freezing but the refrigerator is not refrigerating. I have it set at 7 (coldest) but the thermometer is still reading 56 degrees. The model is MBF2255KEB with serial number 10661671LA. I plan to do the work myself and have cleaned the coils, and the compressor seems to be running. What could be the issue and what steps should I take to fix it?
April 25th, 2024
My Whirlpool Cabrio (model wtw5640xw0) won't start and the lid lock light flashes about 10 seconds after pressing the start button, regardless of the mode selected. I ran diagnostics and received error codes F1 E2, F7 E1, F7 F6, and F0 E5. What should I do to fix this issue?
April 9th, 2024
My washer fills with water but does not complete any other cycle functions. What could be the problem, and what steps can I take to diagnose and potentially fix it?
February 24th, 2023
My Amana adb2500aww dishwasher will not start. The latch has been broken for some time but it still worked until today. The touchpad does not come on at all, and I have checked the voltage to the microswitches on the handle, which are getting power. What could be the issue, and should I check continuity on the microswitches in the up position?
May 7th, 2023
I have an Amana refrigerator that is about 20 years old, model SBI20S2W. The freezer section is not staying cold enough, and the ice maker has stopped working. A repair guy suggested replacing the compressor and filter drier, but he only took off the back panel and did not use an Ohm meter. The sound seems normal. What could be the issue, and should I get a second opinion?
April 9th, 2024
