asked
In 1986, I installed two matching Hampton Bay hugger fans with 4 blades each, 4 outer lamps, and 1 center lamp. One of the fans is not working; the light works fine, but the fan motor just hums. Can this fan be repaired, and how do I go about it? I am 86 years old and can stand on a sturdy ladder, but the mechanical part is what bothers me. Should I get a repairman to look at it for me if necessary?
July 20th, 2023
My dishwasher will not fill with water. I checked the overflow valve and it does not appear to be stuck, the hose is not kinked, and the intake valve is on. What should I check next?
April 18th, 2024
I have a Whirlpool Gold Model# XXXXX gas freestanding range. Every now and then it shuts off while the oven is in use. Usually, pressing cancel/off resets it, but recently we've had to unplug it to reset the electronics. What's making it do that?
April 7th, 2023
Can someone send me instructions on programming the Emerson jumbo remote control?
September 10th, 2023
I have a Bosch Aquastar tankless water heater, model 125B. The water is too hot, and the manual suggests increasing the flow to reduce the temperature. How do I increase the flow to achieve this?
April 3rd, 2023
How do I read continuity on an internal bias thermostat on my Kenmore Model 110 electric dryer? The dryer runs but blows a fuse and doesn't heat. I have removed the heat element and it reads 9.6 ohms. The thermal fuse, thermo cut off, and 250-degree thermo all read 0. There are 4 posts on the thermostat, and I read zero on the top and bottom ones but nothing on the left and right ones. How should I reconnect the wires to the 250-degree thermo, and does it matter which post the red wire from the bottom goes to on the ceramic heat element connection?
November 16th, 2024