David W. asked
My Bosch dishwasher is not functioning correctly. When I start the cycle, the drain pump doesn't turn on as it should, and the dishwasher doesn't fill with water. I can hear something running but it's not the drain pump. Water begins to come out of the standpipe for the lower wash arm, as though the wash pump is running but not at full speed. I've removed the drain pump and verified that it's working. What could be the issue, and what steps should I take to diagnose and fix the problem?
March 1st, 2024
Jamie S. answered
The issue with your Bosch dishwasher is likely due to a malfunctioning impeller kit, which is respon...
March 1st, 2024
Create an account to view answers and interact with the community!
My refrigerator is not cooling, but the freezer seems okay. I've tried resetting it by disconnecting power for 15 minutes, but it didn't help. The model number is RS265/67TD. I received a fault code 22 E. What could be the issue, and what steps should I take to diagnose and potentially fix it?
August 11th, 2024
I turned the timer on my washer so that water would start running into it. Later, I smelled something burning, like an electrical burn. When I went back to the washer, the water was in it, but it had not advanced to the wash cycle. I tried another cycle and pushed the knob in, but nothing happened. Can you help? The model number is *****.
April 23rd, 2024
I have a Scotsman SCE-170-1H ice machine that doesn't do anything when plugged in, except for running the pump in clean mode. What could be the issue and how can I diagnose it?
April 19th, 2024
My Kenmore 790.45589905 oven is not heating up. The element does not heat, but I have checked the wires and continuity on both elements, and they seem fine. The control board also shows 120V on L1(P1) and L2(P7) inputs, and 120V on L2 (P7) output. With Bake or Broil on, I have 120V on one wire connected to each element but nothing on the other wire. What could be the issue, and what should I check next?
September 21st, 2024
My KUDS30IXBL0 dishwasher goes into a drain/cancel cycle 10 to 20 minutes into any cycle, showing immediate error 6-4 if the overfill switch is open and 6-1 if the switch is closed. The overfill switch tested ok, the touch panel and circulation pump are new, and the switch connection is bypassed by direct solder of the wires to the switch. What could be causing this issue and what should I check next?
February 24th, 2023
