Jay S. asked
My Fisher Paykel dryer model no. DE7027G1US displays a code 151 or i51. It runs continuously with no heat and no control panel indications other than the code. The first occurrence was cleared by resetting with a combination of keystrokes, but the sequence is not remembered. What is the problem and how can I fix it?
March 24th, 2024
Glenn M. answered
The issue is likely due to a faulty motor relay on the control board, which will need to be replaced...
March 24th, 2024
Create an account to view answers and interact with the community!
I am converting my Maytag MGT8800FZ range from natural gas to propane. I need a diagram showing the correct orifice positions for the top burners. I have the kit #W10591270, which includes 16k BTU, 10k BTU, 7k BTU, and two 5k BTU burners. What are the correct orifice colors for each burner position?
August 5th, 2024
My Amana refrigerator temperature dial is not working. The model is SXD25QA3L, and it's about 20 years old. When I turn the temperature dial, I can't hear any noise like before. The fan in the freezer is not running, and there's no build-up of water or ice, but water still freezes. The compressor seems to be running smoothly after I vacuumed out the dust. What could be the issue, and what should I do?
September 14th, 2023
I need to replace the starter relay on my Vinotemp wine cooler. The current part says UB1652F on it. Are there certain specs I need to be aware of when I go online to order a replacement, and how do I find the correct model number if it's not readily available?
May 25th, 2024
I have a KitchenAid slide-in gas range, model #YKGSC308LS, where the controls work but the control panel lights do not come on. The oven can be programmed and heats up, but there are no visual indicators. What could be causing this issue, and how can I fix it?
May 11th, 2024
My washing machine, a Whirlpool Commercial Quality Super Capacity 7-cycle 3-speed combination model about 10 years old, has issues with filling properly. It either fills non-stop regardless of the lid being open or closed, preventing it from moving into the agitation cycle, or it completes the first wash and rinse cycles but fails to fill for the second rinse cycle. The issue is intermittent and sometimes resolves after letting the machine rest. What could be the problem and what can I do to fix it?
August 4th, 2024