asked
My Kenmore 80 series washing machine will only spin if it is empty. It drains and agitates, but doesn't spin. What might be wrong and should I be looking at a new washer? If yes, I want another top loader that can speed up the agitation for heavy items like cat beds.
October 30th, 2024
My Whirlpool side-by-side refrigerator model ED5VHEXTQ01 has an issue where the fridge side is not cooling, but the freezer side is working fine. When the freezer door is opened, air blows through to the fridge side. What could be the problem and how can I fix it?
March 24th, 2023
In 1999, I purchased a Dacor Dual-Fuel Range (Model RSD308, Serial No. FD8420405) from Enbridge in Markham, Ontario. Recently, the electric oven stopped working, while the gas burners continue to function. The clock cannot be set, the panel lights blink erratically showing various single-digit numbers, but the oven does not respond to controls. The range has been working well until now, with a history of a cracked front panel cover that was replaced by Dacor in 2002. A minor crack has developed again, but the stove continued to work correctly until now. What is the issue, and is the control panel in need of replacement?
May 29th, 2023
How do I reinstall the door on a ModelShe46c O6UC/33 dishwasher, especially when dealing with spring-loaded hinges that keep moving to the door closed position?
September 10th, 2024
We have a Maytag Model #MAH6500 washer that displayed a Code NF during a power surge. After unplugging and manually clearing the code, the washer did not spin the clothes. When attempting to start the washer again, the door latch interlock closes but immediately re-opens. Do we need to reset the machine after the surge so the machine can start again and hold the door lock?
November 30th, 2024
I have a Whirlpool Duet dryer (GEW9200LW1) that won't start. All indicator lights are working, but when the start button is pushed, only a beep and click are heard. The dryer is in diagnostic mode, and all lights come on with no error indicated. The door switch, thermal fuse, belt switch, and motor continuity test good. The motor's start and run windings have a continuity of 2.1 ohms, slightly out of the 2.4-3.6 range. What could be the issue?
December 10th, 2024