asked
My Kenmore 970C45172-30 front loader won't spin and drain properly. I cleaned the filter, checked the impeller for mobility, ran a snake through the interior and exterior hoses, and adjusted my household plumbing to reduce restrictions. However, after turning the water supply back on, there is still no water flow. What should I do next?
October 21st, 2024
My Kenmore Series 700 washing machine (Type 580, Model #***********) won't initialize a wash cycle. It was humming quietly and didn't finish draining and spinning the last load. I managed to reset it by unplugging it for a while. Now, the lid lock light is on, and it lets me set a new load, but it never starts. What could be the issue?
June 16th, 2024
I have an under-counter dishwasher Model 665.13263K112. Water is left in the machine once the cash is over. I cleaned the filter. What else can I do?
March 2nd, 2024
My Dacor cooktop (model ETT 304) won't come on after a storm shut the hydro down. This same problem happened about 10 years ago, and the repair man said it had to be reset. What should I do to troubleshoot and potentially fix this issue?
September 3rd, 2024
I have a relatively old electric heater from General Electric, model number *****, which also runs the AC unit. Today, a loud high-pitched alarm started going off from it. I turned off the unit and the circuit, but the alarm persisted. When I turned everything back on, the air would not get cooler than 75 degrees F. What is causing the alarm, and is there something I can do to stop it?
February 9th, 2023
How do I put the front user interface cover panel back on my Kenmore Elite HE5T washing machine? I have two plugs left: a blue set from UI7 on a control board and a black plug from UP3 on another control board. The board for the control panel has slots for "UIP", "EXP", and "Service".
November 22nd, 2024