asked
My Kenmore dishwasher control panel lights up, but when I push the start button, nothing happens. I turned the breaker off for 30 minutes, took the front panel off, and all connections seem good. What could be the issue?
August 17th, 2023
My JennAir range alarm just started going off with an F7 error. The touch pad seems to be shorted, but the range still works. How do I stop the alarm? The noise is dreadful, and the cancel button only stops it for a very short time before it starts again. I need to be able to be in my house today and sleep tonight. Help, please!
April 14th, 2024
Oven and broiler will not ignite, but the topside/upper grill will work/ignite. On rare occasions, the oven will ignite after 20 minutes or so but maybe not at all. Ignitors (glow rods) appear to be working fine as they are red hot and bright. What could be the issue and how can it be resolved?
May 11th, 2024
I have a Whirlpool self-cleaning oven purchased in September 1995. The model and serial numbers are *****. The controls light up, and the control panel seems to work fine, but when bake or broil are activated, the heating unit does not respond. Is there an activator to the heating unit that may be bad, or is it possibly the heating unit itself that is bad?
February 25th, 2023
I have a Kenmore Microwave Hood Combination model # 85470 that suddenly shut down with no power, no lights, and no clock display. I checked the breaker and the outlet, both are fine. I opened the microwave and found the fuse, which looks brand new and reads zero on an Ohm meter. I also checked the control board behind the display panel, and it looks fine. What could be the problem?
February 16th, 2024
I just bought a house with a Wolf range and wanted to change from propane to natural gas. The Sub-Zero/Wolf tech said this is a different model. My range shows a red big wolf with 'gourmet' on it. Who should I contact for this conversion? Additionally, when I turn on the oven, I hear the igniter but don't hear the flame turning on both sides of the oven. Is there something I'm doing wrong, or does it need repair?
September 9th, 2024