asked

My Samsung DV395ETPAWR/A1 front load dryer has no power or lights. I've tried a hard reset, replaced the thermal limit switch, the burnt main board, the front panel board, and the thermal fuse behind the blower assembly. I've also checked the thermistor and other components according to the technician's guidance. Despite all these efforts, the dryer still shows no signs of power. What could be the issue, and what else can I check or replace?

September 5th, 2023

Sign Up to View Answers

Create an account to view answers and interact with the community!

Related Questions

My French door refrigerator with a bottom freezer is not cooling, while the freezer is working fine. I've checked the manual instructions, vacuumed the vents, and ensured no food items are blocking the air vents. The freezer was set to '6' and the fridge to '6', causing a knocking noise from the motor. After turning the freezer to '5', the noise stopped, but the fridge still doesn't work. Should I turn off the fridge for 24 hours, assuming ice might be blocking the vents?

November 7th, 2023

I moved into a home with a Whirlpool double oven that has never been cleaned, even though it is a self-cleaning oven. I have run the cleaning cycle and cleaned the inside ovens, but the glass panel doors have brownish black grease stains between the panels that I can't clean. Is there a way to clean the glass without replacing it, and how do I take it apart? Where is the model number located on the stove?

May 11th, 2024

I am replacing the magnetron in a GE microwave. I am having trouble removing the two wires connected to the magnetron terminals. How are they secured to the magnetron terminals?

December 8th, 2023

I have a GE GFE29HSDASS refrigerator with a slow water dispenser. I replaced the filter and the water valve, but the issue persists. What could be the problem, and how can I fix it?

March 4th, 2023

We have a GE dishwasher (Model GDF520PSF6SS, serial LF834267B, about 3.5 years old) that's not working. We've replaced the pump motor, cleaned the sprayer arms, and ensured the water is hot and the sink disposal is clear. The soap dispenser opens, but the water is not getting to the soap to dissolve it. The spray arms are working, and the sides and door are wet after a cycle. The first cycle after the pump replacement worked perfectly, but now we're back to the same issue. What could be causing this and what should we check or try next?

January 17th, 2024