Shelley M. asked
My Samsung RS 263 refrigerator (manufactured June 2010, model number *, serial number *) will not make ice unless I reset the ice maker, and it only makes 5 ice cubes when reset. The refrigerator section does not cool below 54 degrees, while the freezer is cold enough at -8 degrees. The ice maker problem was temporarily resolved by disconnecting the 120 Volt power for an hour, but the issue returned. What could be the problem and how can I troubleshoot it?
July 9th, 2024
Michelle C. answered
The issue you're experiencing with your Samsung RS 263 refrigerator could be due to a failing contro...
July 9th, 2024
Create an account to view answers and interact with the community!
My Miele dishwasher, model G2832 SCI, won't come on; no display, no power. It started beeping and shows a technical fault F78 on the display. What could be the issue and how can I fix it?
January 6th, 2023
Our Ice maker has stopped working. It is a KitchenAid KUIC18NNZSO, replaced about 18 months ago. It needed to be fixed 6 months ago, and I think they put a fan in. Can you help?
June 6th, 2024
Jenn air model JDB1100AWB dishwasher will not latch. What could be the issue and how can it be fixed?
April 27th, 2023
My cooktop makes noises, some are a quiet vibration noise and some are loud vibration. What could be the issue and how can I fix it?
July 18th, 2024
I have a gas Maytag Dryer - LDG9304AAM. The igniter glows and the gas ignites on startup but shuts off after a minute or so. I have checked for continuity on the igniter, fuse link, flame sensor, high limit thermostat, and cycling thermostat. I suspect the gas valve solenoids are okay because it lights on initial startup. I also checked for continuity on the igniter. I have continuity on all the items mentioned above. I checked for good airflow and replaced the blower, which was worn on the shaft. The exhaust air seems good to the outside vent, but I removed the duct work from the back of the dryer and ran it with the front door in place to ensure good airflow. Still, no continuous heat, just on startup for a few minutes. What could be the issue and what else can I check?
May 3rd, 2023
