Vanessa W. asked
My Whirlpool washer stopped mid-wash cycle. It won't agitate or drain, but it will fill to the next water level. My wife reported a slight electrical/rubber odor, which was gone by the time I got home. There is only one pair of ladies' pants in the load. What could be the issue and how can I troubleshoot it?
September 16th, 2023
David C. answered
The issue is likely related to the lid switch, which stops all motor functions when the washer's lid...
September 16th, 2023
Create an account to view answers and interact with the community!
Our refrigerator has quite a bit of frost on the side of the freezer below the ice maker. What might be the problem?
April 1st, 2023
My Samsung dishwasher, model DW7933LRASR-AA, shuts down after one minute with blinking lights for Normal, Heavy, and Smart Auto settings. What could be the issue and what parts need to be replaced?
November 26th, 2023
November 19th, 2023
I'm fixing a front load washer. The drum leaked and had a bad bearing. After replacing the gasket, the two plastic halves of the drum refuse to fit back together. Is there a trick to reassembling them correctly?
October 5th, 2023
I have a KitchenAid refrigerator model KRSC503ESS00, purchased in December 2016, that stopped making ice. Test 44 (harvesting) cycles but ends with a 23, and test 45 (fill) does not fill and ends with a 01. The ice tray seems to be in place but the system doesn't recognize it. I replaced the control board and the ice maker (IM), but I'm getting the same results. The manual says I should have 14V, but I'm only getting 4.25V during test 44 and 8.4V during test 45. The ice tray moves fine, but it doesn't indicate 'home'. What could be the issue?
April 13th, 2023
