Diane K. asked
I need to determine the voltage for the light panel in the upper part of my Refrigerator (Model #: PGCS1PJXC SS; S/N: AS309447). The light panel is a LED assembly, and I have 120 Volts AC at the door switches. I am unable to locate a wiring schematic for this refrigerator.
January 26th, 2024
Wanda W. answered
The light panel in the fresh food section, which is approximately 6 inches by 12 inches, is powered ...
January 26th, 2024
Create an account to view answers and interact with the community!
I accidentally put dish detergent in my dishwasher, which caused excessive suds and required multiple cycles of vinegar and salt to clear. Now, the dishwasher seems to run but doesn't empty, leaving water under the heating element and dishes feeling powdery. The discharge hose is not plugged, and after manually draining the water, the machine switched to eco mode. The bottom of the machine is still full of water, and the pump is humming but not pumping. How do I access and replace the pump, and what tools and sealers are needed for disassembly and reassembly?
March 14th, 2023
My Whirlpool stainless steel refrigerator is not making ice. What could be the issue and how can I troubleshoot it?
December 24th, 2024
I have a model SDC 302 oven that is locked and won't unlock. I have tried turning the circuit breaker on and off, using the self-cleaner, and the oven door still won't open. The door is also too tight to unscrew the screws holding the control panel. How can I unlock the oven?
January 17th, 2024
We left the fridge door open overnight, now the motor will not start. The freezer side is cool but the fridge is not. The fridge is a GE side by side, only 2 years old. What could be the issue and how can it be resolved?
September 25th, 2024
I have a KitchenAid refrigerator, model number KFIS25XVMS2, and the arm of the ice maker is stuck in the off position. I have tried to lower the arm manually, but the tension was too great, and I did not want to break anything. I do not see any ice holding the arm in the up or off position. What could be the issue, and how can I fix it?
December 6th, 2023