I have a Whirlpool Duet washer (model WFW9150WW01) that stops in the middle of the wash cycle and displays a code 18. The door stays locked, and the washer does not reach the rinse cycle. I have cleaned the drain trap, pump, and drain hose, and replaced the water overfill switch, but the issue persists. What could be causing this, and what should I check or replace next?

August 1st, 2023

My Kenmore Oasis Elite dryer is not completely drying clothes during a cycle. I have checked for blockages, replaced the ignitor, coils, thermistor, and thermostat, and verified their continuity. I also replaced the control panel, but I cannot enter test mode to check for codes. What could be the issue and what else can I check?

May 18th, 2024

I have a stacked washer/dryer unit, model 417.97312704 (possibly 417.97812704). The dryer works, but the washer does not fill, wash, or spin. The 'open lid' safety lock-out appears to be working, and the machine may have been improperly loaded (unbalanced) just before the problem presented. What could be causing this issue and what should I check next?

April 1st, 2024

I just bought a used Maytag Neptune model MAH 5500BWW and it isn't spinning out completely. The clothes are still wet after the cycle. I suspect something might be jarred or not level from moving it. What could be causing this issue and what can I check?

March 14th, 2023

I have a GE top loader washer model # XXXXX that flooded due to a failed sump. After drying and re-energizing, the washer fills and drains but won't spin or agitate. I've replaced the motor and control panel board, checked continuity on the lid switch, and tried resetting by opening/closing the lid. No error codes are showing, and I suspect the shaft/mode controller might be damaged. What else can I check or replace to resolve this issue?

June 27th, 2024