asked
I recently had a GE Cooktop (Model PP944STSS) installed over granite counters. After installation, we found a bag with mounting brackets and a foam liner that was not installed. The mounting brackets are not needed, but what is the purpose of the foam liner? Should it be installed, and how difficult would it be since the cooktop is already installed?
March 31st, 2023
My refrigerator and freezer only turn on when the doors are opened, and they shut off when the doors are closed, causing everything to defrost. What could be causing this issue and how can I fix it?
August 12th, 2024
I am having an issue with my Jennifer-Air range hood model Jxt5830ads where the lights are not working. Initially, one light flashed and went out, and after replacing the bulb, it still didn't work. Six months later, the second light experienced the same issue. I suspect a power surge or short caused the electronics to malfunction. Which part do I need to replace to fix this issue, and can I handle this myself without calling a service tech?
September 20th, 2024
We have a brand new Model SHX7PT55UC dishwasher. The first time we ran a load, everything was fine. The second time, it displayed the "watertap" indicator and faucet symbol on the floor display. We reset the washer, and it sounded like water was draining from the appliance. But when we try to start a new wash, it reverts to the watertap message within about 2 minutes. It's hard to believe there is an actual problem with the water supply, because it worked fine the first time. We have the installer coming back this afternoon to check it. Do you have any guidance for him?
January 31st, 2024
I have a Whirlpool Duet Sport washer that won't drain properly. I've already cleaned out the pump trap, but it still drains very slowly. What could be causing this issue, and what steps can I take to fix it?
July 27th, 2023
We have a Bosch Classic Electronic dishwasher approximately 4-5 years old. The check water light illuminated on the front panel. After replacing the inlet solenoid, water is now escaping from a hole at the top right of the clear plastic compartment where the inlet hose attaches. Water flows through this to the next plastic compartment (blue) which includes the float mechanism. The float is not rising due to insufficient water entering the chamber, causing the water to overflow out of the hole. What actions can be taken to resolve this issue?
February 24th, 2023