Omar J. asked

🔌  Appliance

My Frigidaire JSI-26 Refrigerator/Freezer is not getting cold. I defrosted it with a blow dryer, which worked for a day or two, but the issue has returned. What could be causing this and what steps should I take to fix it?

May 4th, 2024

Kathryn C. answered

The issue is likely due to a failed defrost thermostat, which is a common problem. Here are the step...

May 4th, 2024

Sign Up to View Full Expert Answers

Create an account to view answers and interact with the community!

🔌Related Questions

Our Bosch Maxx WFL 2062 machine does not function properly on program 3. The drum rotates only 1/4 turn every 3 minutes or so and on the end of the program the machine does not spin. All other programs function normally. What could be the issue and what steps should be taken to resolve it?

October 4th, 2024

I own a GE Monogram Single Wall Oven ZET3038SH3SS. The touch control panel and the clock do not light up, and the interior light does not turn on when the door is opened. I checked the circuit breaker and reset it, but the issue persists. What could be the problem and how can I troubleshoot it?

April 11th, 2023

I have a Jenn-Air wall oven, model JMW9530DAB, that is taking much longer to bake items and not cooking them evenly in the center. The oven temperature swings from a high of 391F to a low of 326F when set at 350F, which I believe is too wide for proper baking. Is there a way to reduce this temperature swing to a more reasonable range of 15F to 20F on either side of 350F, or is there anything else I can do to improve baking performance?

September 20th, 2023

I'm looking for a wiring diagram for a Whirlpool Microwave WMH1017AB-0. Can you help me find it?

August 16th, 2024

I have replaced the board on my Maytag MEW6627DDS, but it is still only displaying the clock. The oven lock works, and all buttons respond with a beep, but the control does not start any commands, and I cannot change the clock time. I have tried shutting off the circuit breaker and restarting. What could be the issue, and is there a way to troubleshoot this without a voltage tester?

September 9th, 2023