Sara M. asked
My Kenmore Coldspot fridge started shaking and making noise at the end of the compressor cycle. The fridge is level. Some suggest a loose compressor bolt, while others think I should get used to it. What do you think?
May 10th, 2024
Craig L. answered
The shaking and noise at the end of the compressor cycle indicate that the piston pin inside the com...
May 10th, 2024
Create an account to view answers and interact with the community!
I have an LG Privilege fridge that was previously leaking inside the fridge, but now it's leaking inside the freezer and freezing the water. I have emptied all contents and unplugged it to thaw. What could be the issue and how can I fix it?
June 18th, 2024
My refrigerator's drain pan is overflowing, and it fills to overflow about 4-5 days after each time all the water is removed. The evaporator fan is running, the coils have been cleaned, and the fan in the rear appears to be working fine. What could be causing this issue?
December 1st, 2023
I have a double oven, model #SC302T. After cleaning either oven, the thermal switch trips and a reset of the switch is necessary. How can I fix this problem permanently?
October 30th, 2023
I have a GE 3.5 cubic feet washer, Model# WJRE5500GWW, purchased 12/26/08. There is a small leak showing up on the tile floor coming from under the right-front side of the machine. I have checked off the Troubleshooting Tips on Water leaks in the Owner's Manual, and everything is dry behind the machine. Additionally, the agitator is making a new clicking sound during the wash. What should I do?
December 5th, 2023
Refrigerator model # XXXXX Serial # XXXXX has issues with its TurboCool and CustomCool settings. The Citrus setting does not work, causing items to freeze solid in the bin, and liquids on lower shelves of the door are icing up. The temperature at the top of the door reads 38 degrees, and the freezer reads 0 degrees (even after adjusting to 2 degrees). The unit is about 8 years old. What could be causing these issues and what can be done to fix them?
November 24th, 2024