Ian S. asked
My refrigerator is icing up in the freezer region, and water is dripping from the freezer. What could be the issue and how can I fix it?
March 21st, 2023
Stephanie B. answered
The issue is likely due to the defrost drain line freezing over, which is a common problem. Here are...
March 21st, 2023
Create an account to view answers and interact with the community!
My Whirlpool Caprio washing machine, about five years old and not used often, has a problem where the power and washing instruction panel accept inputs, the door locks, and the sensor comes on, but nothing happens after the sensor makes a sound. A service man recently replaced a part, but the issue persists. Could it be something simple from lack of use, and can I get a manual on the panel and troubleshooting?
November 22nd, 2023
My Maytag Neptune dryer (model mde9700ayw) does not turn on, has no lights, but there's a constant electrical hum. The panel doesn't light up, and the displays won't light up either. I have already unplugged and plugged it back in after a half hour, but there's no change. What could be the issue, and what steps should I take to fix it?
June 15th, 2024
My Fisher Paykel dryer model no. DE7027G1US displays a code 151 or i51. It runs continuously with no heat and no control panel indications other than the code. The first occurrence was cleared by resetting with a combination of keystrokes, but the sequence is not remembered. What is the problem and how can I fix it?
March 24th, 2024
I am converting my Maytag MGT8800FZ range from natural gas to propane. I need a diagram showing the correct orifice positions for the top burners. I have the kit #W10591270, which includes 16k BTU, 10k BTU, 7k BTU, and two 5k BTU burners. What are the correct orifice colors for each burner position?
August 5th, 2024
My Amana refrigerator temperature dial is not working. The model is SXD25QA3L, and it's about 20 years old. When I turn the temperature dial, I can't hear any noise like before. The fan in the freezer is not running, and there's no build-up of water or ice, but water still freezes. The compressor seems to be running smoothly after I vacuumed out the dust. What could be the issue, and what should I do?
September 14th, 2023