asked
My Whirlpool Cabrio washing machine, model number WTW6200SW3, skips the rinse cycle and goes directly from wash to spin. I've tried running diagnostics, but there are no error codes showing up. What could be the issue, and how can I fix it?
May 19th, 2024
My Kenmore Elite dishwasher model 665.13969k014 refuses to start washing dishes. When I push start and close the door, the 'add a dish' light begins to flash continuously. I have checked the loads to ensure the door closes properly and reset the circuit breaker, but the issue persists. What could be causing this and how can I fix it?
December 25th, 2023
My Whirlpool refrigerator (model WRF736SDAM12, 3 years old) is short cycling, turning on and off every 3-4 seconds. The fan near the ice maker starts and stops repeatedly. What could be causing this issue, and what steps should I take to fix it?
April 29th, 2023
My GE refrigerator (model GSH25JSXBSS, 9 years old, serial # MR224072) runs continually. There is no frost, water dripping, and the fan is on. What could be the issue and what steps should I take to diagnose and potentially fix it?
March 20th, 2024
My KitchenAid KCMS2055SSS-1 microwave starts, lights work, convection fan works, but it does not heat the food. The microwave was manufactured in 2008. I plan to do the work myself and am considering either buying a new one and installing it or replacing parts if they are readily available. I would prefer an exact dimensional replacement to make the job easier. What should I do?
January 8th, 2024
I have a Dacor ECD230 Double Oven. The upper oven will not heat on any cycle (bake, broil, or convection). I have performed the voltage tests for each cycle as outlined by Dacor and measured 240 volts for all of them. I have also checked and pushed the reset on the HTC switch, but it did not feel like it was tripped. While I had a bake cycle on, I attempted to measure across the HTC terminals, but my meter showed just stray millivolts. Should I be able to measure 240v across those terminals? Is a bad HTC the next step? Should I be looking at something else? Prior to the current situation, we had lost the convection cycle, and after replacing the element, we also lost bake. The dealer diagnosed a double fault on the upper relay board and said it needed to be replaced. I elected to replace it myself, but the issue persists.
May 31st, 2024